Whirlpool & KitchenAid Refrigerator Repair Westminster
Brand-specific refrigerator service for Whirlpool and KitchenAid units across Westminster, Broomfield, and Arvada.
Whirlpool & KitchenAid refrigerators are two of the most common brands we’re called out to service in the Westminster area, and that’s not a coincidence — Whirlpool Corporation manufactures many of the refrigeration units sold under the KitchenAid nameplate, so the two brands often share compressors, control boards, ice maker assemblies, and other core components. Our refrigerator repair team in Westminster works on both brands regularly, so our technicians can usually diagnose either brand quickly because we’re seeing many of the same parts and the same failure patterns across both lines. Have a Samsung or LG unit instead? Our Samsung refrigerator repair page and LG refrigerator repair page cover the brand-specific issues we see most on those models.
Common Whirlpool & KitchenAid Refrigerator Problems
Whirlpool and KitchenAid refrigerators commonly develop problems with ice makers, start relays, water valves, control boards, door seals, and compressors. The right repair depends on the symptom and model, so diagnosis is important before replacing a component.
Certain issues show up again and again on these units. Here’s what we see most often in the field.
Compressor and Start Relay Failures
A refrigerator that hums, clicks repeatedly, or shuts off and restarts on its own is often dealing with a failing start relay or a compressor that’s struggling to start under load. On Whirlpool and KitchenAid units, the start relay is a relatively affordable part to replace, but if the compressor windings themselves have failed, the repair moves into sealed-system territory and the cost goes up significantly.
Ice Maker Auger Motor Failures
Many Whirlpool-built ice makers use an auger motor to push ice out of the bin. When that motor burns out or the gears inside strip, the ice maker will still make ice, but it stops dispensing, or it jams and grinds. This is one of the most common service calls we get on both Whirlpool and KitchenAid refrigerators with in-door or top-mount ice dispensers.
Temperature Control Board Problems
The electronic control board manages compressor cycling, defrost timing, and fan operation. When it starts to fail, you’ll often see inconsistent temperatures — a freezer that’s too cold while the fridge section runs warm, or vice versa — sometimes with error codes flashing on the display panel if your model has one.
Water Inlet Valve Leaks
The water inlet valve supplies the ice maker and, on some models, a water dispenser. Over time, mineral buildup or a worn valve seat can cause it to leak internally, which shows up as water pooling inside the freezer or dripping down behind the unit. This is a frequent cause of the “water on the floor” service calls we get on these brands.
Door Seal Wear
Whirlpool and KitchenAid door gaskets are functional but not indestructible, and Colorado’s dry climate can accelerate the rubber’s tendency to stiffen and crack over years of use. A worn seal lets warm, humid air into the cabinet, which drives up energy use and can cause the compressor to run far more than it should.
OEM Parts for Whirlpool & KitchenAid Refrigerators
Whenever possible, we use OEM (original equipment manufacturer) parts for Whirlpool and KitchenAid repairs rather than generic aftermarket substitutes. OEM parts are built to the exact specifications of your model, which means better fit, more reliable operation, and — in many cases — a repair that lasts as long as the rest of the appliance. Because Whirlpool manufactures both brands, OEM parts availability tends to be strong for both, which usually keeps turnaround times reasonable even for less common models.
Repair or Replace?
Whirlpool and KitchenAid refrigerators are generally solid, repairable appliances, and most of the issues above are worth fixing rather than replacing the unit outright — especially if the refrigerator is less than 8-10 years old. For older units with a bigger failure like a compressor going out, it’s worth weighing the repair cost against a new unit’s price. Our full repair vs. replacement guide walks through how to think about that decision.
Typical Pricing for Whirlpool & KitchenAid Repairs
Pricing depends on the exact model and failed component. Our refrigerator repair cost guide provides a broader breakdown of common repair types and price ranges.
| Repair | Typical Price Range |
|---|---|
| Diagnostic visit | $75–$95 |
| Start relay / start capacitor replacement | $150–$280 |
| Ice maker auger motor / assembly replacement | $200–$400 |
| Water inlet valve replacement | $150–$320 |
| Control board replacement | $280–$550 |
| Door seal / gasket replacement | $150–$300 |
| Compressor / sealed system repair | $450–$900+ |
Troubleshooting Guides for Common Symptoms
Not Cooling
Warm fridge or freezer temperatures and what usually causes them.
See causes & fixes →Ice Maker Not Working
No ice, slow ice, or an ice maker that’s stopped dispensing.
See causes & fixes →Buzzing or Clicking Noise
Compressor and start relay symptoms explained.
See causes & fixes →Need Your Whirlpool or KitchenAid Refrigerator Fixed?
Call now for a same-day estimate or to schedule your diagnostic visit.
Frequently Asked Questions
A few questions Whirlpool and KitchenAid refrigerator owners commonly ask before scheduling a repair. Don’t see your question here? Visit our full FAQ page.
Not identical, but closely related. Whirlpool Corporation owns the KitchenAid brand and manufactures many of its refrigeration units, so a lot of the internal components — compressors, control boards, ice maker assemblies — overlap between the two brands, even though the exterior design and features differ.
Yes, we prioritize OEM parts for Whirlpool and KitchenAid repairs whenever they’re available, since they’re built to the exact specifications of your model and tend to hold up better long-term than generic aftermarket substitutes.
This is a classic sign of a failing auger motor or stripped drive gears inside the ice maker assembly. The ice maker itself is still producing ice, but the mechanism that pushes it out to the dispenser has failed. It’s a common and generally affordable repair on these brands.
Most repairs fall between $150 and $550 depending on the part involved, with compressor and sealed system repairs running higher, typically $450-$900+. We provide an upfront estimate after the diagnostic visit before any work begins.